Planer Sanding Machine 01

Wide Belt Planer Sanding Machine For Sale

  • Type:Planer Sanding Machine
  • Processing Width:30-1300mm
  • Min. Working Length: 420mm
  • Processing Thickness: 2-100mm
  • Working Pressure(MPa): ≥0.6Mpa
  • Application : Planer Sanding Machine is mainly used to process solid wood boards, finger-jointed panels, blockboards, door panels, inlaid wood floors and other boards with large thickness tolerance and high hardness.

Product Description

Planer Sanding Machine 01

The planer sanding machine is a high-efficiency planing equipment that integrates planing and sanding, thickness setting and fine sanding. It is mainly used for large-volume planing of rough boards with large surface errors and high splicing glue lines such as solid wood plywood and integrated materials.

As an efficient and precise solid wood preparation equipment, sanding can well solve the challenges encountered in solid wood planing and sanding.

Compared with the traditional double-sided planer, the sanding machine realizes the function of one machine for multiple uses. This design not only improves production efficiency, but also reduces the difficulty of operation and safety hazards. A good sanding machine can achieve precise parameter adjustment to ensure the uniformity and appearance quality of the sanding effect.

Configuration & Function of Wide Belt Planer Sanding Machine

1.Combine cutter and abrasive belt together

2.Sand and cut solid wood furniture,large size sheet

Configuration & Function

  • Delta PLC control system
  • Touch screen
  • Multiple safety protection
  • Imported φ180 , 9T cutter shaft
Planer Sanding Machine 201

After Sanding Effect

Upper Floating Wood Wide Belt Sanding Machine 201

Product Parameters

ModelCRS-PSG630 P-R-RPCRS-PSG 1000 P-R-RPCRS-PSG 1300 P-R-RP
Working width30-630mm30-1000mm30-1300mm
Working thickness2-100mm2-100mm2-100mm
Woking length≥420mm≥420mm≥510mm
Feed speed5-25m/min5-25m/min5-25m/min
Size of abrasive belt1900×650mm2000×1020m2200×1320mm
Total motor power36.25kw48.05kw78.55kw
No.1 Unit∮180 9T Planer shaft∮180 9T Planer shaft∮180 9T Planer shaft
No.2 Unit∮190Eccentric steel roll, 80 mesh abrasive belt∮190Eccentric steel roll, 80 mesh abrasive belt∮240Eccentric steel roll, 80 mesh abrasive belt
No.3 UnitSH85∮165 eccentric rubber roller & aluminum alloy sanding pad, 120 mesh abrasive beltSH85∮165 eccentric rubber roller & aluminum alloy sanding pad, 120 mesh abrasive beltSH85∮165 eccentric rubber roller & aluminum alloy sanding pad, 120 mesh abrasive belt
Anti rebound deviceHaveHaveHave
Press shoeHaveHaveHave
Working air pressure≥0.6Mpa≥0.6Mpa≥0.6Mpa
Speed of sucked air8200m³/h8200m³/h8200m³/h
Vacuuming mouth diameter∮150mm×3 uint∮150mm×3 uint∮200mm×3 uint
Overall dimensions2350×1400×2150mm2580×1770×2110mm2900×2200×2300mm

Features of Planer Sanding Machine

1. The body design adopts earthquake-resistant and strong structures and profiles to solve the machine vibration caused by high-speed impact cutting of the planer roller.

2. The rollers are tested by a dynamic balancing tester, and the correction accuracy can be controlled within the range of 1g-3g, which is 20% higher than the national standard. Improve the sanding accuracy and avoid the generation of ripples.
3. The crossbeam is made of high-quality manganese steel, which is not easy to break and has high bending strength, which improves the stability of the sanding roller during operation.

4. The open pulley processing assembly, the sanding roller and the pulley are integrated with a stable performance, a firm structure, and convenient maintenance.

5. The surface of the conveyor bed is mirror-finished with high flatness. After long-term natural aging, the material is stable and will not deform, and the precision stability is extremely strong.
6. The blades of the planer roller are densely distributed in a spiral shape, which is used for large-volume planing, with high efficiency and high precision

Product Details

sanding machine details

Working principle of Planer Sanding Machine

The planer sanding machine is a special type of sanding machine. In fact, it also belongs to the wide-band sanding machine, but there is an additional sanding head at the front. The work of the planer sanding machine mainly relies on the rotation of the sanding head in front of the equipment to sand the workpiece. Nowadays, spiral cutter heads are widely used. They have the characteristics of high strength, heavy cutting, light weight, long life and low noise. Most sanding machines will be equipped with a sanding frame behind the sanding head for fine grinding of the workpiece.

The working principle of the planer sanding machine is that after the power is turned on, the button is pressed to generate a circuit, so that the motor drives the sanding head to rotate, and when it contacts the fed workpiece, it is sanded and polished, and then different precisions of sanding are completed under different sanding frame combinations.

Related Product

Three Head Wide Belt Sander 202

Two Head Wide Belt Sander

Three Head Wide Belt Sander 201

Three Head Wide Belt Sander

Application Of Planer Sanding Machine

Planer Sanding Machine is mainly used to process solid wood boards, finger-jointed panels, blockboards, door panels, inlaid wood floors and other boards with large thickness tolerance and high hardness. The machine has advanced technology, high precision, reasonable layout, novel structure, easy operation and is at the international advanced level.

Wood Wide Belt Sanding Machine 011

Product Display

Belt sander machine 01
Belt sander machine 02
Belt sander machine 03
Belt sander machine 05

FAQ

A: It combines planing and sanding in one machine – first rough planing thick boards with high hardness or large thickness tolerance (solid wood, finger‑jointed panels, blockboards, door panels, inlaid flooring), then fine sanding to achieve precise thickness and smooth finish. Our ZZCHRYSO machine replaces a double‑sided planer and a separate sander, saving space and labor.

A: The workpiece enters the front planing unit (spiral cutterhead with dense blades) for heavy stock removal, then passes through one or two sanding units (eccentric steel roll with abrasive belt, followed by a rubber roller and aluminum alloy sanding pad) for fine finishing. The feed speed (5–25 m/min) is adjustable, and the whole process is controlled by a Delta PLC with touchscreen.

A: Three models: CRS‑PSG630 P‑R‑RP (working width 30–630 mm), CRS‑PSG1000 P‑R‑RP (30–1000 mm), and CRS‑PSG1300 P‑R‑RP (30–1300 mm). Thickness range: 2–100 mm. Min. working length: 420–510 mm. Total motor power: 36.25 kW (630), 48.05 kW (1000), 78.55 kW (1300). Dust extraction: 8200 m³/h.

A: Earthquake‑resistant body to handle high‑speed impact cutting. Dynamic‑balanced rollers (accuracy 1–3g, 20% above national standard) to prevent ripples. Manganese steel crossbeam for high bending strength. Conveyor bed mirror‑finished with natural aging for stability. Spiral cutterhead blades for heavy planing with low noise.

A: Very accurate. The combination of planing (removing up to several mm) followed by coarse sanding (80 mesh) and fine sanding (120 mesh) achieves tight thickness tolerance and a smooth surface ready for coating. The eccentric roller design and sanding pad ensure even pressure without chatter marks.

A: Yes. It uses a Delta PLC with touchscreen for parameter setting. The sanding belt is easy to change, and the cutterhead uses replaceable carbide inserts (long life). The machine has multiple safety protections and anti‑rebound devices. Regular cleaning of dust ports (∮150mm or ∮200mm) keeps it running.

A: It has a high‑capacity dust removal system extracting 8200 m³/h. Port sizes: three ∮150mm (630/1000 models) or three ∮200mm (1300 model). This captures both planing chips and fine sanding dust, keeping the work area clean.

A: Solid wood furniture manufacturing, finger‑jointed panel production, blockboard and door panel processing, engineered wood flooring, and any shop that needs to dimension rough hardwood boards with high thickness variation and then finish sand them in one pass.

A: Yes. The spiral cutterhead is designed for heavy cutting on hardwoods (oak, maple, teak) as well as softwoods. The sanding units use different grit belts (80 mesh for stock removal, 120 mesh for finishing) to suit the material hardness.

A: Daily: clean dust from belts and conveyor, check air pressure (≥0.6 MPa). Weekly: inspect sanding belt wear, clean dust ports, check cutterhead inserts. Monthly: calibrate planing depth, lubricate roller bearings, test emergency stops. The open pulley assembly and stable structure make maintenance convenient.

Get In Touch With Us